充电头线路板,充电器头电路板,快充充电头PCB

充电头电路板｛4*6拼版,工艺边加10mm｝-正面图

充电头线路板-反面图

充电头线路板选用1.0mm板厚FR4-S1000H基材,最小孔径0.22mm,线宽间矩0.29*0.3mm,规格26.37*14.5mm,铜皮距板边0.5mm(20mi),孔定位偏差+0.076mm (土3mil),丝印线路偏差+0.076mm (+3mil).